Spring channel Nuts

Spring Nuts

• Spring Nuts primary use is to attach StrutTech
• fittings to the open face of channels
• Nut is molded with integral spring and seats
• into channel notches
• Spring nut can be installed at any location from
• the open side of the channel
• Highly Corrosion Resistant. See Chemical Resistant Guide
• Standard Material is Polyurethane

QBH Spring Nuts Description

Spring channel nuts are designed to install and fix piping, conduit fittings, channel structures,

and channel section composite systems. They consist of a cuboid shaped nut with grooves on one

side and a spring clamped on the other side of the nut. When the screw is tightening the nut, the

threads in the groove are locked at the edge of the channel to hold the nut in place.

The nut of the spring nut system is made of carbon steel or stainless steel, which is made by

punching machine, and the inner thread pattern is drilled at the center of the nut. The length is

34.5mm and the width is 19mm. When the inner thread of the nut is larger than M12, the width is

30mm. The thickness of the nut is adopted for different specifications. The spring material is carbon

steel and stainless steel. The length of long spring type is 38-40 mm, the length of short spring type

is 18-20mm and the Non spring type is not assembled with the spring.

It provides a simple solution for the installation of the spring nut on the pipe, channel structures

or channel section site. The groove design on one side of the nut is suitable for safe installation.

Grooving and texturing improve fixed traction and skid resistance.

In the spring nut system, some spring nuts adopt special design. There is plastic at the top to

clamp the nut, which has a flexible plastic like a collar to hold the nut. Instead of a coiled wire, they

are made of plastic coils or ferrule, which function the same as that of a wire wound spring. But it

does not affect the perforated side of the channel. These types of spring nuts rely on their spring

assemblies to hold the inside edge of the channel rather than pushing the channel in the opposite

position.

Channel nut with spring is used with the pipe or channel support system. The long spring channel

nut is very important to the channel support system. They are inserted through the open side of the

passage and then rotated 90 degrees, where their slots are against the return flange of the passage.

QBH Type 1

Plastic Cover Plain Channel Nuts

Plastic cover inserted onto the without spring style, tapped Metric or Inch thread

style, designed and used to fix and install the objects in the steel channel to be

tightened with the bolt

Spring Channel Nuts, M6-M12, #5 – 1/2″ made of steel or stainless steel from

professional spring channel nuts manufacturer in China

Size: M6-M12, #5 – 1/2″
Material:
1. Steel, Galvanized;

Spring Channel Nuts specification:

Some spring nuts are specially designed without the traditional metal spring,

such as the top of the nut, which is pre installed with a flexible plastic cover to

hold the nut. Instead of a coiled wire, they are designed with a plastic ring (or

ferrule) that basically acts the same as a coiled wire spring, but does not interfere

with the perforated side of the channel. The plain channel nuts size remains unchan

ged. These types of spring nuts rely on their spring components to embrace the inner

edge of the channel, rather than pushing the opposite position of the channel.

The spring nuts have serrated grooves on both sides of the surface on one side,

which helps to align them correctly with the channel rails and hold them firmly in

place during and after tightening.

The spring takes up additional space in the channel, keeping the nut flush with

the inside turning edge of the channel, so no additional operation is required to hold

the part in place when the part is installed and tightened.

Strut channel nuts or strut spring nuts usually have a threaded hole in the middle

to assemble bolts to secure the fitting to the strut. According to different post and

support structure in different installation places, spring nuts can be provided with

various hole sizes to fit in with a series of hexagon head screw (hexagon bolt) sizes

for installation and fixation. They also have serrated grooves on one side to help

align them correctly to the channel rails and hold them firmly in place during and

after tightening

QBH Type 2

Channel Nuts and Bolts

​

Assembled the bolt with the channel nut and the locking clip used to install and fix

in the steel channel structure directly, the nut is tapped by metric or inch internal

thread. The special sizes of the spring length and the nut are available.

Channel spring nut consists of a spring and a oblong nut. The nut has a threaded

hole in the middle, which can be used to tap metric and inch inner threads, and is

used to connect the accessories to the prop by bolt fastening. spring nuts can be

roughly divided into three varieties: long spring, short spring and non spring.

Various kinds and sizes of spring nuts are provided. Channel nuts and bolts is a

very important parts. During installation, a series of hexagon head screws

(hexagon bolts) are combined for fastening installation. Spring nuts with pre

installed built-in bolts are also provided. These are called the stud nuts, which can

be directly used for the installation and fixation of steel channel structures. They

can make the assembly process very fast and efficient.

A special groove tooth pattern is designed in the parallel channel groove of the

strut channel nut to clamp the return lip of the channel. The shear action of the

teeth ensures the safety and firm locking between the pillar channel and the

accessories. The nut is used with the spring support channel.

Long spring channel nut is very important to the channel support system. They are

installed through the open side of the channel and then rotated 90 degrees, where

their slots are close to the inner side of the raceway.

QBH Type 3

Stainless Steel Spring Nuts

Material:Stainless steel, 304 A2, 316 A4

Made of stainless steel 304- 316 materials, with the nut size Length

34.5 mm X Width 19.0 mm X various Thickness and the spring size 38-40 mm

for long spring style, 18-20 mm for short spring style, without spring for

non-spring style.

Stainless steel channel nuts is made of the 304 or 316 stainless steel, which is

made of cold stamping. It consists of a stainless steel nut with an internal thread

punched in the middle and a stainless steel spring clamped on one side of the nut.

Due to the characteristics of stainless steel, stainless steel channel nut has higher

bearing capacity, stronger tensile strength and better anti rust and anti-corrosion

functions than spring steel nuts. They are widely used in places with special environ

mental factors and requirements of special use places.

The specification and size of the stainless steel strut channel nut is consistent with

that of the steel spring nut. The length size is 34.5 mm X 19.0 mm width. When the

size is larger than M12, the width is 30mm. The thickness varies according to

different size specifications. The length of the long spring type is 38-40mm, the

length of the short spring type is 18-20mm, and the non spring type has no spring.

Special size nuts and springs can be customized to attach fittings to the strut.

The unsupported nut is

available in a variety of hole sizes and can accept various sizes of hexagon head

cap screws (hexagon bolts). There are even spring nuts with built-in bolts.They

are called stainless steel strut channel nuts and they make the assembly process

very fast and efficient.

Stainless steel pring nuts also have serrated grooves on one side to help you align

them correctly in the groove track and hold them firmly in place during and after

tightening.The stainless steel spring nut is an integral self-locking nut, which is

fixed with screws to prevent loosening due to vibration. The utility model is applicable

to the installation and fixation of fixed frame channel steel, profile combination,

channel steel structure and pipeline system.

Stainless steel strut spring nuts are designed to provide pull-out and side slip

resistance in excess of the full strength of the channel steel used. The spaced

serrated groove texture is designed to produce wedging effects that increase with

pressure or load. When installing the channel steel, insert the stainless steel spring

nut into any position of the length of the channel steel, connect the accessories,

combine the other channel steel into 90 ° rotation and tighten the bolt.

QBH Type 4

Channel Nut Without Spring

The without spring type, The nut is tapped mm metric or Inch inner thread and the

size of 34.5 mm Length X 19.0 mm Width X various Thickness to fasten with the

bolt, used to install and fix the objects in the metal frame channel, U-channel steel

structure and piping system.

Channel nut without spring belongs to Non spring type, it is one of the main

components of metal channel ,steel channel frame system. Its design provides the

necessary grip for installation and fixation, and realizes the convenient operation

in the installation process. The channel nut is made of carbon steel stamping and

inner hole machining.

Spring nuts of different types and sizes are widely used in the pipeline, steel

composite structure and channel steel frame system industries to facilitate

installation and provide necessary clamping and fastening force. These nuts are

made of high quality carbon steel and stainless steel to ensure strong durability

and bearing strength. The surface of groove nut made of carbon steel adopts the

process of electro galvanizing and hot-dip galvanizing, which increases the

anti-oxidation and anti-corrosion functions of the products. The spring nuts are

inserted into the strut slots and use external threaded fasteners or bolts to

achieve tightening and installation purposes.

Channel nuts provide a quick and easy solution for mounting multiple products on

one strut. The groove side surface of the groove nut and spring nut conforms to

the groove design inside the flange, which creates safety fit, groove and texture,

and improves traction and skid resistance during installation.

The volume of the spring takes up the extra space in the channel. When installing,

the nut should be flush with the inner corner of the channel, and no additional

fixing is needed. It can be moved to the required position to tighten and fix it. The

different lengths of the spring help to determine that the spring nut can be used

for different channel profiles. Long springs are used for deeper channels, short

springs are used for shallower channels, without springs can be directly used to

fix by the bolts.

QBH Type 4

Short Spring Channel Nut AND Long Spring Channel Nut

Short Spring Channel Nut

The short spring type with the spring 18-20 mm length ,​The long spring type with

the spring 38-40 mm length,and The without spring type, the nut of the channel

spring nut 34.5 mm Length X 19.0 mm Width, used to fix and install the steel

channel, piping to be tightened with the bolt,The special sizes of the spring and

the nut are available.

​

Channel nut with spring is one of the main components of channel steel strut

system. It is designed to provide the necessary tightening force, and the

installation process is more convenient and fast.

Slotted nuts shall be fitted with post channel nuts to place and secure fittings,

panels, or clamps in piping or channels. They consist of a nut with a grooved

internal thread on one side and a spring clamped on the other side of the nut.

Tightening the screw in the nut locks the teeth in the groove to the edge of the

channel, holding the nut in place.

Production and sales of complete specifications of various channel spring nuts,

simple installation, channel steel nuts durable, and made of high-quality carbon

steel or stainless steel. The groove texture on one side of the nut will provide a

bite behavior on the twisted edge of the channel portion. The body of the nut shall

have a beveled finish which, when twisted at 90 degrees, is held in place by

contact with the inside wall of the channel.

The spring steel nut is made by cold stamping. The inner hole of the nut is tapped,

and there are metric and inch internal thread patterns.

Long Spring Channel Nut

Supplying with the sizes of Length 34.5 mm X Width 19 mm assembled the long

spring type 38-40 mm length,The normal short spring type 18-20 mm length and

the without spring type, made of the carbon steel or stainless steel materials and

used to install and fix the pipe,channel structures and channel section composite

systems.

The spring nut is an integral self-locking nut, which is fixed with screws to prevent

it from loosening due to vibration. The long spring nut is suitable for the

installation and fixation of fixed frame channel, profile combination and channel

steel structure and piping system.

The nut of the long spring channel nut is made of carbon steel or stainless steel

by punching machine. The nut center is tapped with internal thread. The size of

the nut Length 34.5mm and Width 19mm. When the nut size is larger than M12,

the width is 30mm. The thickness varies according to different nut specifications.

The spring material is carbon steel or stainless steel. The length of the long spring

type is 38-40 mm, the length of the short spring type is 18-20 mm, and non spring

type is without spring. Special sizes of the nuts and springs can be customized.

Strut spring nuts are designed to provide pullout and sideslip resistance in excess

of the full strength of the channel steel used. These nuts are galvanized or hot dip

galvanized and are designed for access and inserts. Indented alternate teeth are

spaced and are designed to create wedging effects that increase with pressure or

load. For installation of channel steel, insert spring nut into any position of channel

steel length, and connect accessories to combine another channel steel into 90 °

rotation for bolt tightening. Easy to use, saving time and workings.

QBH PACKING